XTOOL D9S PRO

XTOOL D9S PRO Full Bi-Directional Diagnostic and Coding Tool 

What is Xtool D9S Pro?

D9S PRO smart diagnosis system is an advanced scanning tool based on the Android operating system. It supports multi-language switching and is suitable for different countries and regions.

Highlights:

• Top Hardware Configuration, Upgrade version of D9 PRO/D9/D8BT/D8
• Global version. No IP limitation. 
• Newest Upgraded Smart Wireless Diagnostic Tool, Supports built-in DoIP & CAN FD
• Advanced ECU Programming & Coding +Flash Hidden + VAG Guided Function Features
• Intelligent Topology Map to Faster Full Systems Diagnosis for Deep Inspection
• 42+ Services & Calibration/Initialization/Matching/Relearn Functions and VAG Guided Function
• Supports AutoScan & AutoVIN
• Bi-Directional Control/Key Programming Capability
• 3 Years Free Updates 
• Supports Australian Ford and Holden, Brazilian Fiat and GM, Iran, Malaysian cars
• with Xtool XVCI Max DoIP Passthru VCI
• Very smooth, well-organized menu, easy to use, operate faster than Autel.
• Built-in WiFi Module – No home WiFi connection required! Simply insert the VCI box into the OBD interface for seamless data transmission, 20X Faster than traditional wireless BT Scanner, and extended communication range up to 66 ft.
• Multi-language

Note: D9S Pro will support vehicles with DoIP protocol, but you will not see the DoIP port available anymore. The DoIP port is now been integrated into the VCI box to make sure the connection and data transfer are more stable. 
So there is no need for a DoIP port on the diagnostic tablet.

Recent Software Update:
[July 2023] Benz Software V21.51 for DoIP models. 
This update brings you expanded coverage, including 12 chassis, along with over 60 new special features and more than 100 actuation tests. 
 

OE-Level Full System Diagnostics:

XTOOL D9S Pro is an OE-level full diagnostic scanner as it can scan ECUs in different types of vehicle systems and subsystems such as engine, TCM(Transmission), SRS(Airbag), ABS, TPMS, BCM, BODY, AC, and much more, read /clear codes, view the live data from each available system, perform active tests to check the work status of modules, providing you with a Dealership- Level only diagnosis, getting the accurate and in-depth results across all automotive systems.

Bi-Directional Control/Active Test

Full bi-directional control ability to verify system input/output by sending commands to the vehicle’s systems/components. Such as EVAP Tests, Compression Tests, turn on/off radiator fan, A/C Clutch On/Off, Fuel Pump, Window/Mirror/Door Lock Tests, Pump and Value Tests, Interior & exterior lights Tests, Sound horn Tests, etc

Smart AutoVin & Auto Scan+BT Connection+Cable Connection：

XTOOL D9S Pro provides you with more efficient diagnosis work. You just need to plug the VCI into the OBD2 port, within a working range of 33 feet(10 m), you can use the D9S Pro to communicate with the vehicle through a BT connection, providing you with higher mobility. Use AutoVin to automatically read the vehicle identification number, or access the OBDII menu to use Auto Scan to perform a comprehensive scan of all available modules to shorten the diagnosis time.

ECU Coding & Online Coding

Quick access to the ECU of a vehicle to re-flash vehicle control modules, and customize the vehicle as needed, optimize the specific performance to improve fuel efficiency, reduce power loss, improve the durability of mechanical parts.

• ECU Coding Capability: Compatible with VW/ AUDI/ SKODA/ BMW/ BENZ ONLY
• Re-flash Hidden Function (Customization) : Compatible with BMW/ VW/ AUDI/ SKODA/ TOYOTA/ LEXUS/ SCION/ MAZDA/ FORD/ LINCOLN ONLY
• Guided Functions: Compatible with VW/AUDI/SKODA ONLY

ECU Programming (Online Calibration & Online Parameterization)

An all-in-one solution for your ECU tuning needs allows you to program or flash ECU after replacing the modules.

• Compatible with BMW/VW/AUDI/SKODA/BENZ ONLYY

Programmable Module Installation

Helps to quickly upload/copy data from the old module to the new module and make it work properly

• Compatible with MAZDA/FORD/LINCOLN ONLY

Topology Map

The APP V4.25.4_6.36 onwards supports intelligent topology mapping.
 

How to get the Newest APP for D9S pro?

1. Reboot the D9S Pro scanner and connect the D9S Pro to the internet

2. Download and install NEW APP

3. Go"Update" screen and download the newest available software packages.

 
XTOOL Module Topology Mapping- Boosting Diagnostic Efficiency by 65% for Tricky Car Problems

• Comes with color-coded module status for quicker access to complete system diagnostics.
• Reveal the hidden interrelations between various vehicle modules.
• Present all faults locations in colored coded module status at one glance.
• Scan the modules highlighted in red and related modules to minimize guesswork
• One-key display of fault codes and direct access to system execution functions.

Supports GM, CHRYSLER, JEEP, DODGE, FORD, TOYOTA, NISSAN, HONDA, BMW, BENZ, HYUNDAI, MAZDA and more to come.
NOTE: Module Topology is not available to all vehicle makes for now.

42+ Special Service Functions

• ECU Configuration: Re-flash the hidden function of the car and customize the vehicle as need.
• Crankshaft Sensor Relearn: Make the right adjustments after replacing the crankshaft sensors to prevent symptoms like slow Response from the Accelerator, Erratic Starting, Stalling and Backfiring, etc
• ABS Bleeding: Perform to bleed the brake system to restore ABS braking sensitivity and obtain a firm brake pedal.
• Fuel Trim Reset: Reset the fuel trims provides for a chance that your adaptive fuel map could become stable.
• IMMO / Key Programming: Disable a lost vehicle key to protect the vehicle from being stolen and add the new key.
• Oil Reset: Reset the new calculation of Engine Oil Life System for an accurate reading of the next oil change.
• EPB: Reset the calipers, brake discs or pads after the electronic parking brake system is repaired.
• BMS Match: Reset after replacing the battery to clear the low battery fault information of the original battery and protect the new battery.
• Injector Coding: Code a new injector to better identify injectors to accurately control fuel injection.
• SAS Adjustment: Clear the fault steering angle sensor memories, perform reset steering angle sensor, and turn off steering wheel warning light.
• Throttle Relearn: Reset the throttle actuators to accurately regulate throttle (or idle engine) operations, helps keep your idling and acceleration smooth.
• Airbag Repair: After replacing the Airbag, reset the Airbag data and clear the collision data.
• Also including: TPMS Reset, Air Suspension, Gear Learning(Crankshaft Relearn), Gearbox(Transmission) Match, Headlight Adjustment, Window Initialization, Seat Configurations, Power Balance, Electronic Pump Activation, Disable Transportation, Tire Refit, A/F Reset, Start/Stop Reset, Language Change, Transmission Service Fast Relearn, Fuel Injector Balance, Camshaft Position Relearn, Idle Learn, Zero- Point Calibration, Fuel Alcohol Composition Reset, Actuator Calibration Test, WCS Reset, VIN Registration(Write), Injector Balance Rate Programming, etc are all available.

Advanced Special Functions, including:

Crankshaft Relearn, Idle Relearn, Fuel Trim Reset, Alcohol Content Reset, SWS Calibration, Yaw Rate Sensor Calibration, ABS Initialization, Transmission Oil Counter Reset, Trans Adaptive Values Reset, Injector Quantity Adjustment, Brake Pedal Sensor Calibration, Pilot Quantity Learning, VIN Relearn, Radio Setup, HVAC Calibration, Engine Test On/Off(for Hyundai) and etc.
NOTE: Special functions do NOT work on all vehicles. Come with VIN # to check compatibility prior to purchase.

NOTE: If you do not see 42+ special functions,which means you are still using an older version App. Please go to Setting-App-Click the right corner to update the App to the latest.

SupportS Newest Doip and with CAN FD Functions

Xtool D9S Pro can work for the Doip protocol and CAN FD.CAN-FD data frame newly adds EDL bit, BRS bit, and ESI bit in the control field, and adopts a new DLC encoding method and new CRC algorithm (CRC field is extended to 21 bits)
Support DoIP Protocol: Compatible with BMW E/F/G Chassis, Jaguar, Land Rover vehicle makes
Support CAN FD Functions: cover MY2020+ GM models

8 in 1 Live Data Graph

Helps you monitor changes in car data in real time,So that you can more accurately identify car problems.
8 in1 data flow display can greatly reduce the inspection time.

One Click WIFI Update

D9S PRO automotive scanner With 3-Year Free Software Update, you are free to update available software at any time. Recommend downloading the newest software if it is available to get the best experience, as we always focus on our scanner to optimize the user experience and improve software issues, improve vehicle coverage, and the accuracy of repair.

Multi-language:
14+ menu languages: XTOOL car diagnostic tool D9S PRO Supports 14+ menu language. Please send the Serial Number(S/N) to change English to Spanish, Portuguese, French, Japanese, German, Polish, Russian, Italian, Korean, Dutch, Swedish, etc.
 

Work with Add-Ons to Further Extent Capabilities

XTOOL D9SPro automotive diagnostic system is compatible with various add-ons as below to further extend its capabilities:

• Works with KC100: for general purpose key programming,
• Works with KC501: for advanced level all purpose key programming,
• Works with EEPROM Adapter: for PIN reading and & EEPROM reading & writing while key programming,
• Works with XV100 Inspection Camera: for hard-to-reach spots visual inspection of stains, rusts, wear and tear, like engine cylinders.
• Works with KS01(For toyota all key lost programmer )
• Works with KS02 ( For Mitsubishi all key lost programmer）
• Works with M821 (for Benz all keys lost)
• Works with M822(For Toyota 8A non-smart key all keys lost)
• Works with AnyToyo SK1 (for Toyota 8A/4A Smart Key Programming bypass pin )

3 Years Software Updates

XTOOL D9S car diagnostic scanner comes with 3 Years of Software Updates to continuously expand vehicle coverage, add newly developed features, improve the interact experience, and fix software glitches.

NOTE: You can use the last update software programs even if you choose not to renew your subscription.

NOTE: You may skip all the years you don't want to update and pay just ONE-year subscription to get the software up to date. No need to pay for past years' subscriptions.

Report Sharing & Printing

XTOOL D9S car diagnostic tablet allows workshops or mechanics to print out the diagnostic reports or directly share the PDF file with customers to avoid disputes.

• Generating Diagnostic Report: Back out all the way to the main menu will generate a diagnostics report automatically. (NOTE: no diagnostic reports available for special functions.)
• Report Sharing: You can set up Gm_ail on the scanner to share your diagnostic report. You may check out YouTUb tutorial video for the set up process or reach us for instructions.
• Set up Printer: This android tablet is compatible with all major printers in the market. Check out YouTube tutorial video for the setup process or reach us for instructions.
• Remote Support: While having issue, you may reach us directly to schedule a remote assistance, providing the Teamviewer ID, the city you live in.

Extensive Vehicle Coverage - 200000+ Cars supported:

Aisa: Compatible with (JAPAN) Acura, Daihatsu, Honda, Infiniti, Isuzu, Jpisuzu, Lexus, Mazda, Mitsubishi, Nissan, Nissan GTR, Scion, Subaru, Subaru, Suzuki, Tlisuzu, (KOREA) Daewoo, Hyundai, KIA, Samsung, Ssangyong; (CHINA) Baic, Beijing, Changan, Changan-Ford, Changcheng, Changhe, Chsuzuki, DF Peugeot, DF Honda, DF Nissan, DF XK, Flyer,BYD, Fukang, Futian,Foton, Geely, Gonow, GZ Honda, Hafei, Haoqing, HC BMW, Hmada, Huachen, Isuzu, JMC, Jacty, Jianghuai, Jiao, Jinlong, Joylong, Lifan, Liuwel-TY, Luxgen, NJ Fiat, Qirul-TY,chery, Qoros, Saicmg, Spark-TY, Trumpchi GAC, Weili, Xiaokang Dongfeng, Xili,Faw Tianjin, Xinkai, YQ Mazda, Zhongshun, Zhongtai, Zotye, Zhongxing (MALAYSIA) Perodua, Proton, (IRAN)MVM

Europe: Compatible with Vaz, Porsche, Maserati, BMW, Seat, VW, Audi, Citroen, Landrover, Smart, Renault, Skoda, Sprinter, Land Rover, Benz, Fiat, Opel, Volvo, Peugeot, Ferrari, Saab, Gaz, DR

USA: Compatible with Gm, USAFord, Chrysler, Willy;

Australia: Compatible with Austford, Holden;

Brazil: Compatible with BXFiat, BXGM
 

Parameters

Operating System：Android 10

Processor：Quad-core processor 1.8GHz

Ram：2G

Rom：128G

Display：9.7-inch capacitive, 1024×768 resolution

Connectivity：USB/Wi-Fi/Bluetooth

Camera：8-megapixel autofocus rear camera with flash

Sensor：Gravity sensor

Audio Input/ Audio Output：Microphone / Loudspeaker

Ports：USB3.0/DC charging port/VGA port DOIP port

Battery：3.7V, 10000mAh, Rechargeable Lithium-ion Battery

Input Voltage：12V DC

Operating Temperature：-10~50℃

Relative Humidity：< 90%

Dimensions：315.07×218.35×34.61 mm

Package Includes:

1pc x XTOOL D9S Pro tablet
1pc x VCI Box
1pc x For KIA-20 adapter
1pc x For Toyota-17 adapter
1pc x For GM/DAEWOO-12 adapter
1pc x For Honda-3 adapter 
1pc x For Suzuki-3 adapter
1pc x For Hyundai/Kia-10 adapter 
1pc x For Fiat-3 adapter
1pc x For Nissan-14 adapter
1pc x For Mazda-17 adapter
1pc x For OBD2-16 adapter
1pc x For BMW-20 adapter
1pc x For Benz-38 cable
1pc x For Mitsubishi-12+16 cable
1pc x For Benz-14 cable
1pc x Main cable
1pc x For Universal -3 cable
1pc x For Citroen-2 cable
1pc x For Audi-4 cable 
1pc x For Audi-4 clip cable
1pc x Cigarette lighter
1pc x Power adapter
1pc x USB cable
1pc x Type-C cable
1pc x US power cord
1pc x EU power cord
1pc x Manual