LAUNCH X431 PAD V Elite Bi-Directional Diagnostic Scanner with SmartLink C 2.0

2024 LAUNCH X431 PAD V Elite Bi-Directional Diagnostic Scanner with SmartLink C 2.0 Global Version
 

Why Do You Buy Launch X431 PAD V Elite from Diag Auto Clinic?

• LAUNCH official authorized dealer
• 2 Years Free Update Online on LAUNCH Official Website, 1 Year Warranty
• 2024 New Version, Global Version, No IP Restrictions
• Lifetime Tech Support Online

PAD 5 Highlights:

1. High configuration hardware: 10.1 inch Touchscreen, sun readable screen, protection grade IP65, more waterproof, more resistant to falling, and the vehicle can work normally after rolling

2. Support 5G Wi-Fi Diagnosis, 4GB RAM + 128GB ROM （can up to 256GB）

3.Updated the connector from Smart Box 3.0 to Smart Lick C, Smartlink C supports remote diagnosis (needs activation card)

4. Online ECU Programming + Online Coding + J2354 Programming 

5. OE-Level Full System Diagnosis + 50 More Reset Service

6. Full Bi-Directional Control / Active Test + ECU Coding + Guide Function

7. FCA AutoAuth Access + SCN Online Coding

8. Support support Topology Mapping + J2534/RP1210/D-PDU / CAN FD DolP New Protocols. Smartlink has built-in CAN FD and DoIP protocols, don't need DoIP cable. 

9. 25 Language Support, No language barrier

10. Auto VIN Scan + Diagnostic Feedback +Maintenance records, ect

11. Support the expansion of 24V truck diagnosis (Optional)

12. Added Tesla _EV vehicles: Model - 3, Model - S and Model- X ( Buy in MALL)

13. 2 Years Free Update. Besides, you can use all functions as normal after 2 years free update it will not be locked!!!

14. Extended module: Compatible with Oscillograph, X-PROG 3, TSGUN Wand, RF-Sensor, BST360 Battery Test, VSP600 Videoscope, ADAS, 24V Heavy Duty software , Wi-Fi printer, EV diagnostic kit, New energy vehicle, Multimeter, Ignition analysis etc.

15. Launch X431 PAD V is identical to the X431 PAD Ⅶ ELITE except for screen size and battery capacity, also PAD V is much cheaper than it.

16. Supports VAG SFD Unlock manually (need to get unlock token by yourself)

New Function: ODO check and ODO check , Reset MSVIN

ODO check: Read the mileage information stored in each module;

RESETMSVIN: Read the VIN information of each module and cooperate to check whether the vehicle has been changed in mileage or replaced
 

Multi-Language Supports

Support English, French, Spanish, German, Russian, Korean, Japanese, Portuguese, Italian, Polish, Dutch, Hungarian, Finnish, Simplified, Czech, Turkish, Greek, Arabic, Danish, Persian, Romanian, Serbian, Swedish, Chinese Traditional

Optional Add-on Modules (option functions)

This LAUNCH X431 diagnostic tool PAD V supports many extended modules including:

• VSP-600 VideoScope: for up-close visual inspections in confined areas.
• X-PROG & X-PROG3 Immobilizer: for lock-smith level key programming & IMMO service.
• O2-1 ScopeBox, Oscilloscope: quickly acquire the circuit signal, and slowly display the waveform to observe and analyze.
• Wi-Fi Printer: print out diagnostic data & reports.
• X431 TSGUN: activate all sensors, relearn & program LAUNCH sensors.
• BST360 Bluetooth Battery Tester: get a thorough test of the vehicle battery.
• Heavy duty module: software License Renew Card and Adapters for PAD V
• IMMO software package: advanced immo key programming function as X431 IMMO Plus/IMMO Elite
• EV diagnostic kit: perform battery pack analysis
• X431 ADAS Mobile/PRO: When the adaptive cruise control module (ACCM), radar sensor or front bumper has been replaced or does not meet the maintenance calibration requirements, you need to perform "radar calibration" on your vehicle.

What is the difference between X431 PAD V ELITE and X431 PAD V?
Launch X431 PAD V is identical to the X431 PAD Ⅶ ELITE except for screen size and battery capacity, also PAD V is much cheaper than it.
1. X431 PAD V ELITE is an upgraded version, optimized and upgraded hardware.
2. X431 PAD V ELITE comes with CAN FD cable , but without car adapter and cable.

Launch X431 PAD V Elite Function

ECU Programming

1. Programming new ECUs: Replace new ECU(Determine if programming or coding is required based on fault code prompts). It can read and back up the original ECU data of the vehicle. (Note: The newly purchased spare part numbers need to be equal to the original ones.)

2. Reprogramming second-hand ECUs: Clear second-hand ECU data for reprogramming(if the second-hand has the anti-theft data, it needs to be used with LAUNCH X-PROG3 to clear anti-theft data first, and then match it with the original anti-theft data before reprogramming.).

3.Update the ECU: Some of the ECU has BUGs so it will cause some faults that are difficult to repair. ( For BMW 2889 DME intake valve, carbon deposition, and some of F serious machine oil lamps can't be zero.)

4. Fixing lost data of ECU: When the software in the ECU corrupts the program due to battery or grounding issues(the Hardware is normal), re-programming can rectify it back to normal operation.

5. Reprogramming on failed programming ECU: If the programming fails but the hardware didn't damage, the LAUNCH X431 PAD V can reprogram the module in Manual Mode which is compatible with VW/Audi/Ben/BMW. And it supports Programming Backup/Restoration that is applied to match anti-theft data for Mercedes-Benz engine modules and transmission modules, which requires purchasing X-431 PROG3 additionally (If the programming fails, ECU will not communicate and you will not be able to access the system ).
 

6. J2534 Reprogramming:

As a local J2534 PassThru device, the SmartLink C VCI can work with the PC installed with the OEM diagnostic software to perform J2534 reprogramming. In this case, the PC must be installed with LAUNCH's J2534 tool, which can be downloaded from the LAUNCH website.

Please Note: 
a. Supports BMW, Mini, VW, Audi, Jaguar, Land rover, Porsche, Skoda, Sear, Renault, Nissan, Subaru, Hyundai, Kia, Chery, Trumpchi, EXEED online programming
b. NOTE: All of the above programming functions are not supported in Portugal and Spain for the time being; North America (U.S.A., Canada and Mexico) currently only supports for Mercedes-Benz and BMW models software online programming functions.

Supports Benz, Porsche, Skoda, Seat, Sprinter, Nissan infiniti, Hyundai, Kia, Chery, Geely online programming till 2023.
Part of Renault till 2021, Subaru till 2022, Ford/Mazda till 2019, Audi, VW, BMW, Smart till 2024


Full OE-LEVEL Bi-Directional Control Scan Tool (Active Test):

Enables you to transmit control commands to operate the vehicle systems, without using the vehicles' controls, to verify system input and output such as:Turn on the radiator fan / Turn on interior & exterior lights / Turn on sound horn / Modulate the throttle / Open & close windows / Operate mirrors / Test door lock actuators/ Injector Test ;Turn Off ACC Lane Keeping Assist System (LKAS) ;Turn ON/OFF Front and Rear side ACM Solenoid , turning the fuel pump on and off, cycling the a/c ,clutch on and off, Left clutch electromagnetic coil test，Acceleration Device Test，Oil Pressure Control Test，DYNAMIC camera aiming，Vehicle level position calibration, Brake Vacuum Pump, Inlet and Outlet Valve tests, Open Brakes tests, Parking Brake Motors, Wheel Speed Sensor Supply, PARKING BRAKE tests,Suspension Level Control Calibration( rodeo test).

Bi-Directional Control ( Active Test )

The launch scanner x431 pad v support: Injector Buzz Test , Idle Speed Adjustment, Window Lock Test, Door Lock Test, Glow On/Off, ACG On/Off, Pump and Valve Test, Fuel Pump, EGR Test, IMRC Test, EVAP Test, A/C Compressor Activation, Turn on the Radiator Fan, Clutch On and Off, Acceleration Device Test, Modulate the Throttle, Solenoid Valve, tank Ventilation, Switch Cylinder Correction Off/On, etc.

OEM Topology Mapping

1.With topological diagram Function it can displays the entire system through the Topology Map to glance all the modules with trouble code, which is easy to locate faults and causes. Up to 5 ways of DTC display: Easy View of All Systems

2.Topology, list, separately click into the control unit, Intelligent Diagnostics details, vehicle diagnosis report, among which Topology is the newest and innovative configuration.

3.Color-coded topology displays all system status in one page and structure of communication between modules. Communication between modules and status can be spotted in a glance and you can locate faults more intuitively to solve problems quickly! Overall, the "topology mapping" function on the LAUNCH X431 can be an extremely useful tool for mechanics, DIY enthusiasts, and anyone else who needs to diagnose and repair vehicle faults. NOTE: Topology is not universal to all the vehicles.

Topology Mapping Vehicle List:
America:
Chrysler, Jeep, Dodge, GMC, Buick, Chevrolet, Cadillac, Ford, Lincoln

Aisa 
Suzuki, Mazda, Toyota, Lexus, Honda, Acura, Nissan, Infiniti, Nissan GTR, Mitsubishi, Subaru, Hyundai, Kia, Ssangyong

Europe:
Skoda, Seat, Volvo, Land Rover, Jaguar, Renault, Dacia, Porsche , Peugeot, Citroen, Benz, Maybach, Sprinter, Smart, Opel, Abarth, Lancia, Alfa Romeo Maserati, Ferrari, Aston Martin, BMW, Mini, Rolls Royce, VW, Bentley, Bugatti, Lamborghini, MAN TGE, Audi

China 
Trumpchi, Chevy, Geely, Lynk & Co etc

50+ Special Reset functions

Launch x431 pad v auto diagnostic tool has been equipped with over 60 commonly used special functions to cope with the complex issues hidden in the systems after repairing.✔️Get full special functions on the diagnose menu.select diagnose menu>select your car model and year>select system> special function

1.Oil Lamp Reset: perform reset for a new calculation of Engine Oil Life system once changed the oil.
2.EPB Reset: Help replace and reset the brake pad.
3.BAT battery service(BMS): Clear the fault information of low battery and make it match again
4.D.PF service: Regeneration of diesel particulate filter systems.
5.Fuel Injector Coding: Write the new injector code into the car system for correct cylinder injection quantity.
6.TPMS service: Read TPMS data and point out issues related if there are any.
7.Suspension Reset: Adjust the vehicle body height sensor for level calibration.
8.A/F Reset: Set or learn Air/Fuel ratio parameters
9.Adblue Reset: Reset urea after the diesel exhaust treatment fluid is replaced or filled up.
10.Coolant Bleeding: Activate the electronic water pump
11.Language Change: Change vehicle system language.
12.Nox Sensor Reset: Reset catalytic converter learned value stored in ECU.

More functions: Stop/Start Reset, Seat Calibration, Transport Mode, Windows Calibration, AC System Relearn/Initialization, High Voltage Battery Diagnosis, GPF regeneration, Reset Fuel Alcohol Level, Reset Fuel Trim, VGT Reset, Reset Fuel Trim, E.GR Valve Learn, Crankshaft Position Variation Learn, Clutch Pedal Position Learn, Idle Learn, Fuel Economy Test, Fuel Alcohol Composition Reset, CBS Reset UDS etc,.(all functions are depending on the specific car models, not for all cars)

NEW ADDED 6 RESET FUNCTIONS ON Nov, 2023: ECU RESER, FRM RESET, CLUTCH RESET, GATE RESET, TURBO RESET, RISENSOR RESET

Over 35 reset and relearn services

Covers majority of makes and models worldwide up to 2018/2019/2020/2021 for Oil Reset, Injector Coding, Brake Reset, SAS Reset, BMS Service, ABS Bleed, Throttle Matching, TPMS Reset, DPF Registration, Gear Learning, AFS Reset, EGR Adaptation, Gearbox, Sunroof, SUS Reset, Window Calibration, Seat Calibration, Language Change, A/F Reset, Coolant Bleed, Transport Mode, Adblue Reset, NOx Sensor Reset, Stop/Start Reset, Headlight Adaptation, Seat Adaptation, Door and Window Initialization Study, Air Suspension Adaptation, Media Video Reset, Cluster Reset, Downtime Service, Tire Change, and more.

VAG Guided Function

LAUNCH X431 PAD V car scan tool provides step-by-step repair guidance for technicians.the function of guiding the use of the product to prevent the car setting caused by wrong operation.Compatible with VAG series vehicles(Volkswagen / Audi / Skoda / Seat etc.

PMI (Programmable Module Installation)：

Support PMI function, Compatible with Ford /Lincoin/ Mazda etc. This function is used when you need to replace a module (replace ECU) or initialize a module.No need using the J2534 or buying a subscription.

Pre-Scan and Post-Scan function

Step 1. Auto SCAN the Vehicle: the Auto VIN function can automatically identify the vehicle and all equipped systems, codes and code details will be listed.

Step 2. Print Pre-SCAN Report with customized with shop and vehicle information.

Step 3. Repair Vehicle: creates efficient repair plan from the start.

Step 4. Auto SCAN Repaired Vehicle: ensures no new faults were created during repair and no DTCs are present at completion. Step 5. Print Post-SCAN Report: proves all DTCs on Pre-SCAN report are fixed.

AutoAuth for FCA SGW

you will have access to the security gateway module on 2017 and newer Fiat/ Chrysler/ Dodge/ Jeep vehicles(2017-2022), so that the diagnostic tool can clear codes, run bi-directional active tests, actuations, relearns or even IMMO key programming (pulls PIN & write), ADAS calibration assistance etc.

North American Registration/Login Address：https://webapp.autoauth.com/

Europe Registration/Login Address：https://www.technicalinformation.fiat.com

(please note: FCA account needs to be purchased )

Unlock FCA SGW security gateway in North America*Need AutoAuth subscriptions 
 

Purchase European SGW Function license in Mall to unlock FCA, Renault and Benz security gateway in Europe.
Including:

• Mercedes Benz gateway license (1 year)
• FCA & Maserati gateway license (1 year)
• Renault & Dacia 50 connections

Work for Both 12V cars and 24V trucks (Optional)

If you need heavy duty truck software, please contact with us and buy software from us.

then we will help you authorize heavy duty truck software and send the Non-16pin connector kit to you and you can use this disgnostic tool to diagnose 12v cars and 24v trucks without HD module.

2 Years Free Update

Support one-click upgrade of operation system, client side, car model software and firmware.We have always been committed to providing customers with more professional services and better use experience. From November 2022, we have been expanded this X431 PAD V to two-year free update, and we will continue to optimize the product in the future.

SmartLink C 2.0

Work with the PC installed with the OEM diagnostic software to perform the J2534 reprogramming

Support Protocols: CAN/CAN_PS/FT_CAN_PS/SW_CAN_PS/FT_ISO15765_PS/ISO15765/IS
O15765_PS/SW_ISO15765_PS/ISO14230/ISO14230_PS/ISO9141/ISO9
141_PS/J1850PWM/J1850PWM_PS/J1850VPW/J1850VPW_PS

Support for Toyota, Lexus, Thain, Honda, Acura, Volvo, Volkswagen, Audi, Sieter, Skoda, Bentley, Lamborghini, BMW, GM, Opel, Saab, Chevrolet, Cadillac, Ford, Chrysler, Subaru, Mercedes, Land Rover, Jaguar, ect ，Updating

Support DolP, CAN FD and other protocols with SmartLink C connector

it is compatible with CAN-FD protocol and supports the latest For GM vehicles manufactured after 2020. Adopts advanced CRC algorithms to accommodate more data from 8 to 64 bytes in the CAN frame, which runs faster than other products and reduces the risk of undetected errors to greatly enhance the user experience.

Supports For Chevrolet Onix 2020-2021 year
Supports For Chevrolet Tracker 2020 year
Supports For Chevrolet Suburban 2021 year
Supports For Chevrolet Tahoe 2021 year
Supports For Buick
Supports For Cadillac Escalade 2021 year
Supports For Cadillac Escalade 2021 year
Supports For GMC Yukon 2021 year
Supports For GMC Yukon XL 2021 year
Supports For Holden
Supports For DAEWOO
Supports For Alpheon
Supports For Ravon
Supports For Pontiac
Supports For Saturn
Supports For Hummer

DoIP

With Diagnostics over DoIP, diagnostics introduced over UDS are used over TCP/IP and Ethernet. This enables much higher data rates than with CAN. save both in terms of time and expenses in the case of complex diagnostic tasks and flash applications. Compatible with BMW (F&G chassis), Volvo models (2018 later), Land Rover & Jaguar models (2017 later).

LAUNCH PAD V Elite Support Car list

Chinese cars: Beijing Automobile, BAIC Magic Speed, Dongfeng Fengshen, GAC Trumpchi, GAC Mitsubishi, Haima, Mustang, China GM, Beijing Jeep, Beijing Hyundai, BYD, Changan Suzuki, Dandong Shuguang, Dongfeng Fengxing, Hainan Mazda, Geely, JAC , Jiangnan Alto, Lifan Motors, Nanjing Iveco, Chery, Qingling, Shanghai Volkswagen, FAW-Volkswagen, Zhengzhou Nissan, Zhidou, Zotye, ZTE, etc.

Asian cars: Honda, Acura, Toyota, Lexus, Mazda, Nissan, Infiniti, Hyundai, Kia, Ssangyong, Daewoo, Isuzu, Daihatsu, Suzuki, Mitsubishi, Subaru, etc.

American cars: Chrysler, Dodge, Jeep, American Ford, Lincoln, GM, Buick, Cadillac, Chevrolet, etc.

European cars: Aston Martin, BMW, Rolls Royce, Mercedes-Benz, Maybach, Peugeot, Volkswagen, Bentley, Bugatti, Ferrari, Fiat, Abbas, Lancia, Romeo, Renault, Maserati, Lamborghini, Citroen, Audi , Porsche, Volvo, Land Rover, Jaguar, Rover, Opel, Skoda, SEAT, Mini, Saab, etc.

Parameter:
Android 7.1 OS
ualcomm 8-core processor
9360mah Battery
10.1 inch 1920*1200 sunlight readable screen (Gorilla Glass)
Docking & charging station included with QC3.0 Quick Charge technology.
2.4GHz&5GHz Dual-Frequency Wi-Fi
free adjustment of nearly 180 degrees;
support three modes of hanging, support and normal.
Soft rubber corner protector.

Package List:

1pc x LAUNCH X431 PAD V ELITE tablet
1pc x SmartLink C 
1pc x for K-20 adapter
1pc x for G/V 12
1pc x for FD 6+1
1pc x for HA 3
1pc x for TA 22
1pc x for TA 17
1pc x for CR 6
1pc x for B 20
1pc x for BZ-38
1pc x for BZ-14
1pc x for M/H-12+16
1pc x for NN/14+16
1pc x OBD main cable
1pc x lighter
1pc x power cable clips
1pc x USB cable
1pc x test cable
1pc x power cable 
2pcs x boxes
6pcs x fuses
1pc x EU standard power adapter
1pc x US standard power adapter
1pc x user manual