Launch X431 GIII X-PROG 3 Immobilizer Key Programmer

Launch X431 GIII X-PROG 3 Immobilizer Key Programmer

R 16,990
ADD TO CART

Launch X431 GIII X-PROG 3 Immobilizer Key Programmer XPROG3 Chip Reader for X431 V, X431 V+, Pro5, Pros, Pro3S, X431 PAD V, PAD VII Supports MQB
 

Launch X431 G3 Highlights:


1. All-in-One Key Programmer. Integrates Multiple Function Models
2. Reads & Writes Most Engine/ Gearbox ECUs Without Disassembling the Shell
3. Supports VW/ AUDI MQB Platform Engine ECU Replacement or Cloning (Read engine ECU data directly from the key).
4. Works with Reprogramming Device to Backup/ Restore Programming Data (For Bosch/Siemens engine ECU).
5. Compatible with Multiple X-431 Series Diagnostic Tablet (X-431 VX-431 V+, X431 Pro5X431 ProS, X431 Pro3s+X-431 PAD VX-431 PAD VII, Immo PAD, Immo Pro, Immo Plus, Immo Elite, X-DIAG Pro3 etc)
6. Enables Reading/ Writing EEPROM, On-Board MCU, and BMW CAS4+/ FEM Chips, Mercedes-Benz Infrared Keys, Generating Special Keys, Reading BMW Engine ISN Code.
7. You can buy MCU3 Adapter to do Benz All Keys Lost and ECU TCU cloning.
8. Update VAG MQB NEC35XX D70F3524, D70F3525, D70F3526, D70F3529, D70F3532, D70F3537 add key & all keys lost NEW!!!

NOTE: XPROG3 cannot work standalone

launch x431 x-prog3-feature 1


New Software Update

March 2023

1. Add CAS2, CAS3/3+ IMMO system file generated key function, supported to acquire EEPROM after CAS module read and generate dealer key using EEPROM file

2.FRM module replacement, add FRM module data function, supported to download FRM module data with internet connection.

3. Adds OBD preprocessing function for BMW BDC IMMO system (program BMW BDC key via OBD)

Jan. 2024.


Adds MQB calculator. Obtain sync data for free.
Need 
Instrument panel CS code 16 bytes
Ecu 16 bytes CS code
Tcu 16 bytes CS code
ELV 16 bytes CS (if present)

V10.95 (Feb 28th, 2024)

1) Added a total of 48 RH850_encrypted single-chip machine read and write functions,
including R7F701008, R7F701011, R7F701016, R7F701021, R7F701OO9, R7F701012, R7F701017, R7F701022, R7F701026, R7F701002, R7F701010, R7F701013, R7R01018, R7F701023, R7F701027, R7F701014, R7F701019, R7F701024, R7F701028, R7F701032, R7F701040, R7F701042, R7F701044, R7F701046. R7F701050, R7F701003, R7F701015, R7F701020,R7F701025, R7F701029, R7F701033, R7F701041, R7F701043, R7F701045, R7F701047, R7F701051, R7F701030,R7F701034, R7F701048, R7F701052, R7F701054, R7F701056, R7F701006, R7F701007, R7F701049, R7F701053

2). Add a total of 13 VW IMMO MQB instrument read-out functions, including D70F3524, D70F3525_V1, D70F3525_V2, D70F3525_V3, D70F3525_V4, D70F3526_V1, D70F3526_V2, D70F3526_V3, D70F3526_V4, D70F3529, D70F3532_V1, D70F3532_V2, D70F3537

3). Added OBD pre-process function for BMW FEM/BDC immo system.



V10.80 (May 25th, 2023)

1. Added the key learning and instrument replacement functions for Johnson Control MQB instruments (including chips A2C81589600, A2C81589700, D70F3526, and D70F3529).

2. Added the key learning, all keys lost, and instrument replacement functions for Johnson control instruments as of year 2014

3. Added the instrument cloning function for VDO NEC 35XX MQB instruments (including chips A2C81 589600, A2C81 589700, D70F3526 and D70F3529)

4. Added the functions “All Keys Lost” and instrument replacement for the fourth-generation 35XX instruments.


X431 X-PROG3 Functions 

1. Read BMW engine ISN code.

2. Read/write BMW CAS4+ and FEM chips.

3. Read/write Audi fifth-generation steering column chips

4. Read/write EEPROM.

5. Read/write MCU.

6. VW Fourth-generation Dump Mode All Keys Lost.

7. Read engine in BENCH mode.

8. Read gearbox data.

More features are constantly updated
 

XPROG3 Advantages (Cloning function only available with PAD V/PAD VII/Pro5/Turbo/ Throttle etc)

1. Supports VW/AUDI MQB platform engine ECU replacement or cloning (Read engine ECU data directly from the key).

2. Supports VW/AUDI MQB platform gearbox ECU replacement or cloning.

3. Supports ECU replacement for the fifth-generation of Audi (0AW/0B5) gearbox.

4. Supports reading, writing & cloning the ECU for the fourth-generation of VW UDS engine.

5. Supports BMW E chassis 8HP gearbox ECU reprogramming to empty.

6. Works with reprogramming device to backup/restore programming data (For Bosch/Siemens engine ECU).

Compatible With Multiple X-431 Series Diagnostic Tablet:

X431-Throttle, X431-Throttle III,  X431-Torque, X431-Torque III, X431-Turbo, X431-PAD II AE
X431 Pros, X-431 PRO GT, X-431 PRO V4.0, X-431 PRO 3 V4.0, X-431 PRO 5, X-431 PAD III V2.0, X-431 PAD V, X-431 PAD VII

NOTE:
*X-PROG3 will connect PAD VII/PAD V/Pro5 and IMMO series (IMMO Pro/IMMO Elite/IMMO Plus) via USB, for other X431 tablets, only Bluetooth or WiFi connection. 
*To clone ECU or TCU with X-PROG3, you need PAD series or IMMO tablet series tools. X431 V/V+/Pros v1.0 with X-PROG3 cannot do ECU/TCU cloning. 
launch x431 xprog3 compatible devices


Supported Brands

VW, Audi, Skoda, SEAT, BMW, Mercedes-Benz, Toyota… (updates to be continue)


X-PROG3 Features:

1. Compatible with X-431 series diagnostic scanners, X-PROG 3 enables reading/writing EEPROM, on-board MCU and BMW CAS4+/FEM chips, Mercedes-Benz infrared keys, generating special keys, reading BMW engine INS code.

2. Supported brands: VW, AUDI, SKODA, SEAT, BMW, MERCEDES-BENZ, TOYOTA, etc. More models continue to be updated.

3. Supported systems: Automatic Transmission, Instrument System, CAS, Body System, Lock System, etc.

4. Compatible with: X-431 PRO GT, X-431 PRO V4.0, X-431 PRO 3 V4.0, X-431 PRO 5, X-431 PAD III V2.0, X-431 PAD V, X-431 PAD VII

5. Reads & writes most Engine/Gearbox ECUs without disassembling the shell
 

Launch X431 G-3 Core Functions

1. Integrated the functions of key matching/copy, anti-theft IC reading & writing, and ECU reading & writing, etc.

2. Supports common ECU/MCU/EEPROM major manufacturers, with over 1200 product models, and constantly updating.

3. Supports ECU replacement for all lost without disassembly for VW/AUDI non-35XX instrument (it can be read directly through independent harness without removing the IC).

4. Supports ECU replacement for the fourth-generation of VW/AUDI engine;

5. Supports ECU replacement for the fifth-generation of VW/AUDI Bosch and Siemens engines.

6. Supports the all lost and replacement for the fourth generation of AUDI EZS, comfortable ECU, and KESSY IC.

7. Supports the BMW F and G chassis 8HP gearbox ECU reprogramming to empty.

8. Supports the BMW CAS4/CAS4+ module replacement.

9. Supports the ECU cloning and replacement for BMW Siemens engines.

10. Erase the password for Mercedes-Benz engine and gearbox within 3S.

11. Add the function of calculating the password for the Mercedes-Benz key within 1 minute.

Supported Chip Brands:
It supports common mainstream ECU MCU manufacturers, with more than 1,000 product models, and they are continuously being updated.


Launch X431 X-PROG3 Supported Chip Brands
 

Supported EEPROM Brands:
It supports common mainstream EEPROM manufacturers, with nearly 1,000 product models, and they are continuously being updated.


Launch X431 X-PROG3 Supported eeprom Brands


X-prog3 ECU TCU Clone Function Only with high-end tablets (PAD5, PAD 7, PRO5, IMMO PLUS etc)


xprog3 clone function

XPROG3 Operation Connection:
Connection method 1: Directly connect to OBD16 for key matching, data reading and writing, etc
Connection method 2: Place the anti-theft EEPROM or MCU chip in the chip burning socket, and then insert the chip burning socket into the slot of the immobilizer programmer locker and lock it to realize the data interaction between the IC anti-theft chip and the diagnostic host
Connection method 3: After removing the ECU from the car, connect the anti-theft ECU pin to the DIY slot of the immobilizer programmer through the cable to realize the data interaction between the anti-theft ECU and the diagnostic host.


launch-x431-x-progo3-connection-3


How to Update Launch X-PROG3 Software?

1.On the main diagnostic screen, tap Software Update to enter the update center. Check the software you want to upgrade, and then tap Update.


update launch x431 x-prog3 1


2.Once downloading completes, the software packages will be installed automatically.


update launch x431 x-prog3 2

Specification:

InterfaceDB26, DB15
Input PowerDC12V
Working CurrentMax500mA
Power Consumption5W
Storage Temperature-20℃~70℃
Working Temperature0℃~50℃


launch x431 x-prog3 parameter


Package List:


1set x Launch X-PROG 3


MCU3 adapter (optional)
Toyota emulator key (optional)
Toyota H non-smart key AKL cable (optional)
Toyota 24-pin smart key AKL cable (optional)
Toyota 27 pin smart key AKL cable  (optional)
Gearbox Cloning adapters (Optional)

 

Launch X431 GIII X-PROG 3 Immobilizer Key Programmer XPROG3 Chip Reader for X431 V, X431 V+, Pro5, Pros, Pro3S, X431 PAD V, PAD VII Supports MQB
Share on Share on Facebook Share on Twitter Share on WhatsApp

Customer reviews

No reviews yet.
Click here to contact us on WhatsApp